# API Reference v10.3.1 (Python)

## Ge1xGripperError (enum)

Module: zaber_motion.product

Error for a GE1x series gripper.

To use this type, add `from zaber_motion.product import Ge1xGripperError` to the top of your source code.

| Name | Value | Description |
| --- | --- | --- |
| `Ge1xGripperError.NONE` | `0` | No error. |
| `Ge1xGripperError.UNDERVOLTAGE` | `1` | The gripper supply voltage is too low. |
| `Ge1xGripperError.OVERVOLTAGE` | `2` | The gripper supply voltage is too high. |
| `Ge1xGripperError.OVERCURRENT` | `3` | The gripper is drawing too much current. |
| `Ge1xGripperError.OVERTEMPERATURE` | `4` | The gripper temperature is too high. |
| `Ge1xGripperError.MOTOR_PHASE_LOSS` | `10` | There is a 3-phase imbalance in the motor. |
| `Ge1xGripperError.OVERSPEED` | `11` | The gripper has exceeded its rated speed. |
| `Ge1xGripperError.ENCODER_ERROR` | `32` | There is an error with the gripper encoder. |
| `Ge1xGripperError.ENCODER_COMMUNICATION_ERROR` | `33` | There is a communication error with the gripper encoder. |
| `Ge1xGripperError.SAMPLING_CIRCUIT_ERROR` | `34` | The gripper current sampling offset is abnormal. |
| `Ge1xGripperError.DRIVER_CIRCUIT_ERROR` | `35` | There is an error with the gripper driver circuit. |
| `Ge1xGripperError.FLASH_CHIP_ERROR` | `36` | There is an error with the gripper flash memory. |
| `Ge1xGripperError.FILE_SYSTEM_ERROR` | `37` | There is an error with the gripper file system. |
